JasonL Posted November 5, 2004 Share Posted November 5, 2004 The Screen just arrived so I'm currently trying to figure out what bits go where. I assume the two holes are guides for the respective left and right brooklands screens. The holes are along one edge of the stantion rather than in the middle - which way round does the stantion go - holes to the front or back. What is recommended to attach the screens to the stantion - sizes of screw/nuts would be useful. Thanks Jason Link to comment Share on other sites More sharing options...
Northern Banana Posted November 5, 2004 Share Posted November 5, 2004 Can see you are going to be busy this weekend - remember you have an early start on Sunday!! Can we have some pics when you've finished. Northern Banana.com New Video - Cross country Superlight Chase!! Link to comment Share on other sites More sharing options...
JasonL Posted November 5, 2004 Author Share Posted November 5, 2004 Just removed the windscreen, stantions & wiper arms are off. Now comes the hard part. Link to comment Share on other sites More sharing options...
Mick Day Posted November 5, 2004 Share Posted November 5, 2004 I used, I think, M5 S/S fasteners to fit mirrors & Brooklands to stanchion. Use countersink fasteners from underneath with nuts on top. Link to comment Share on other sites More sharing options...
JasonL Posted November 5, 2004 Author Share Posted November 5, 2004 Thanks Mick Paul forgot to mention that a box has also arrived from Caterham with some half doors which need fitting too. Good job I've got next week off. Jason Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now