mick mccabe Posted July 23, 2001 Share Posted July 23, 2001 Hi can any on tell me if its possible to get round the problem of fitting a sierra XR4x4 lsd diff. The problem being the different drive shafts the XR4x4 diff needs e.g unequal length splined ends that fit into the diff. Does any one know if a XR4i has the same unequal length inner joints as these had drum brakes so are fitted with the swaged type joints caterham use and could be shortened,any advice would be most welcome. Thanks in advance Mick Link to comment Share on other sites More sharing options...
EFA Posted July 23, 2001 Share Posted July 23, 2001 Early didions had drum brakes - perhaps these were 2wd XR4i?? Link to comment Share on other sites More sharing options...
mick mccabe Posted July 24, 2001 Author Share Posted July 24, 2001 thanks for info Arnie, what I really need to know is does the XR4i have unequal length splines into the diff type shafts, do you have any idea?. cheers Mick. Link to comment Share on other sites More sharing options...
EFA Posted July 26, 2001 Share Posted July 26, 2001 Phil Stewart at Road Race Trans should know. Arnie Webb Any humour casued by the above posting is purely intentional. See Fat Arnies 2 piece Seven here See the Le Mans Trip Website here See the Lotus Seven Club North Kent Website here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now