JKJ Posted August 7, 2004 Share Posted August 7, 2004 Looking to fit a basic plastic oil catch pot, ex Redline Components to my '91 1700 X-flow, any pointers please. My car is fitted with heater and wash bottle so not alot of room under the bonnet to position the thing, can it be piggy backed to the washer bottle/battery. Any tips regarding the routing of the hoses. Link to comment Share on other sites More sharing options...
JKJ Posted August 7, 2004 Author Share Posted August 7, 2004 Sorry for the multiple posts, trying to sort my Norton Internet Security. Link to comment Share on other sites More sharing options...
Leadership Team Mcalvert Posted August 8, 2004 Leadership Team Share Posted August 8, 2004 Pop rivetted to the front of the passenger footwell is the classis place. Is that not available for you? Regards Michael. Link to comment Share on other sites More sharing options...
RiF Posted August 8, 2004 Share Posted August 8, 2004 Just keep it away from the exhaust and best behind the engine in case any oil was to come out and onto the engine or exhaust. Richard in France Flying fast in my very bright yellow 226bhp Duratec 7, with internal kevlar/carbon panels and pushrod suspension 😬 😬 😬.for pictures of 7 and carbon Link to comment Share on other sites More sharing options...
GTD Posted August 9, 2004 Share Posted August 9, 2004 Pop some sump foam in it to stop any oil sloshing around. G 4 Geoff Leather Good - Carbon Fibre Bad 619 GTD here Paying for 619GTD here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now