jackb_ms Posted August 6, 2004 Share Posted August 6, 2004 Hello On a VVC plenumn you have a little tube of copper pocking out. It is blocked by a little rubber cap. This rubber cap is getting very old on mine and is falling into bits. Can I bloke this pipe with a bit of silicone? Is there sone risk that the silicone might be suck into the engine? Thank for your help Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
tiddy1 Posted August 6, 2004 Share Posted August 6, 2004 Jack, I pulled the pipe out with a pair of mole grips then filled the hole with epoxy, made it look neater Simon Link to comment Share on other sites More sharing options...
jackb_ms Posted August 6, 2004 Author Share Posted August 6, 2004 good plan I'll do the same tomorow Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now