david nelson Posted July 24, 2004 Share Posted July 24, 2004 I am looking for a pair of 0.25 ears please e-mail or call me if you have a pair 07711 365149 thanks David Link to comment Share on other sites More sharing options...
Paul McKenzie Posted July 25, 2004 Share Posted July 25, 2004 Dave, Do you want me to save you a lot of money Add the following to your existing setup: 1.0mm ally shim across the top two bolts 0.5mm ally shim across the bottom two bolts Hey presto, 0.25 deg rear camber at a cost of nowt Paul Link to comment Share on other sites More sharing options...
Chelspeed Posted July 25, 2004 Share Posted July 25, 2004 Intrigued. Why shim both the top and bottom bolts (unless you want widetrack too....). Surely a 0.5mm shim on the top bolts will do exactly the same as your solution? As an aside I'd get a geometry check first as just assuming that your current 2 deg radial ears actually give you 2 deg on each side is probably wishful thinking, it certainly was on mine. Get the current set up checked then shim both sides to 0.25mm. Oh and as you have done the geometry, have the wheels off and shim stock out take the opportunity to shim the ear to de dion tube bolts to get the correct toe settings as well. Link to comment Share on other sites More sharing options...
Paul McKenzie Posted July 26, 2004 Share Posted July 26, 2004 Chel, You're absolutely correct I was reproducing the dimensions of the 0.25 ears. Paul Link to comment Share on other sites More sharing options...
nippy90 Posted July 26, 2004 Share Posted July 26, 2004 iv a set of 0.25 ears if u are still looking £20 each +p&p tel 07710521405 thanks norman Edited by - nippy 90 on 26 Jul 2004 10:35:03 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now