Crossflow roller rockers

[andy couchman]

Standard lift ratio.

 

Either S/H or does anyone know where to get them new? (Know that Burtons do them but price seems v high - I'm sure I can recall seeing them cheaper).

 

Thanks.

 

Andy

1988 Crossflow live axle

[Peter T]

No such thing as cheap roller rockers, only Titan make them now, and yes their quality is good and not cheap !

 

Support the 7 Society...... Ehhh?

[edmandsd]

You should buy Mike Barnby's (R500 magnesium split rim manufacturer) fully integrated rocker assembly with tubular pushrods - much better than r/rockers. Mike only made two, one for him and one for my old crossflow engine. This set up completely removes valve train flex which r/rockers and standard pushrods won't, particularly if you're using high valve acceleration cams like the Kent 254/264/272 range.

 

Home of HTR700

[barry.h]

Andy,

 

I do have a spare s/h standard lift ratio set in good condition which I could be persuaded to sell at somewhat less than the Burton price of £646 *eek* .

 

If you are interested, make me an offer.

 

Barry

 

[Peter T]

Make sure that the needle bearings are perfect, if not then steer clear as the early versions wore through the needle bearings and the hardened rocker itself, these are not repairable !

 

Support the 7 Society...... Ehhh?