julians Posted June 24, 2004 Share Posted June 24, 2004 DOes anyone know what diameter the hole in the dash is for the standard caterham gauges? Juts in the process of ordering a blank carbon dash and some hole cutters, so need to know what size holes to cut for these guages. Link to comment Share on other sites More sharing options...
Peter T Posted June 24, 2004 Share Posted June 24, 2004 52mm, and 80mm. Support the 7 Society...... Ehhh? Link to comment Share on other sites More sharing options...
julians Posted June 24, 2004 Author Share Posted June 24, 2004 excellent thanks Link to comment Share on other sites More sharing options...
shn7 Posted June 24, 2004 Share Posted June 24, 2004 Concur on the sizes. No need for hole cutters, just use a Dremel with the router attachment to get close to the required size then finish with a sanding drum. Worked perfectly for me. Steve. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now