keith d Posted May 29, 2001 Share Posted May 29, 2001 I've got to clear some space in my workshop. Any interest in the following parts all in good condition. Parts for BDR or Xflow Balanced set of 4.9 inch std rods with Cosworth bolts £100 Lightened, blalanced and tuftrided set of 4.3 inch rods with Cosworth Bolts £60 Balanced set of Farndon steel 4.6 inch rods with Cosworth bolts £250 Steel flywheel 12 bolt for 7.25 inch clutch £50 AP Racing 7.25 inch single plate paddle clutch (lug drive type), AP Racing release bearing and special alloy release bearing carrier to suit type 9 (1,000 running in miles only) £150 AP racing 7.25 inch single plate sintered clutch (A ring type) £80 Lightened iron flywheel with HD Borg & Beck cover and plate (for type9) £60 Pair K&N filters for 45s 80 mm deep £25 Distributor, OE Lucas ignition pack and coil £25 13 row ½ inch BSP oil cooler £20 Parts for BDR only Set 83.5 mm Accralite pistons £160 Pair Cosworth BD1 cams £120 Set REC valves std size 1.22â€/1.00†£100 Water pump £20 Parts for Xflow only Set duplex valve springs £15 Duplex chain set £20 Holbay K3A cam £40 Cosworth A6 cam £40 Set of Cosworth 81 mm pistons £120 Polished alloy rocker cover (dry sump) £20 Holbay front mounted dry sump pump with enough parts incl. casings to build another £150 Side mount take off plate and tacho drive gearbox (fits where oil pump normally goes) £30 Smiths 0-9K chrono tacho and cable £30 Email or tel 01252 317723(H) or 01483 244647 (W). I'm in Aldershot, Hants. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now