murph7355 Posted May 22, 2001 Share Posted May 22, 2001 Sanity check needed. I'm putting a "qr" connector on the end of the headlights to avoid having to cut wires again should I need to take them off. Bit of rudimentary maths/physics suggests I should only need 7A max, even if all elements are on (high beam, indicator and side light). I've got an 8A connector. Put your hand up if you think I'm going to set fire to the car! Link to comment Share on other sites More sharing options...
Paul D Jones Posted May 22, 2001 Share Posted May 22, 2001 If you are using the bullet type of conector then these are self regulating ie a 30 amp cable will not fit in a 10 amp conector so as a rough guide if the cable fits neatly it will be ok the blue male/female bullet connectors are a few pence each Paul Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now