Petrolhead Posted May 11, 2001 Share Posted May 11, 2001 I thought I would post this on behalf of a mate of mine. Thought you guys would be able to help. WANTED ALL PARTS FOR BARE CHASSIS UP BUILD, INC CLOCKS,PEDALS,MASTER CYLINDER, WIPER MOTOR,SUSPENSION ,BRAKES, WHEELS & TYRES, 2.0 16V ENGINE READY TO FIT OR SUMP, INLET 45`S ETC TO ENABLE ENGINE INSTALLATION. MAY BE INTERESTED IN ROVER 1.6-1.8 K SERIES, ALSO TRIM & ONE BLACK LEATHER S TYPE SEAT PLEASE E MAIL ME WITH DETAILS AND I WILL E MAIL OR PHONE YOU BACK. THANKS MICK, NEWCASTLE UPON TYNE, Northumberland 0191 2857354 Better to go in a blaze of glory than to fade away teeth.gif Link to comment Share on other sites More sharing options...
Petrolhead Posted May 25, 2001 Author Share Posted May 25, 2001 Just getting this back to the top Better to go in a blaze of glory than to fade away teeth.gif Link to comment Share on other sites More sharing options...
Robin Renton Posted May 25, 2001 Share Posted May 25, 2001 I have an 8,000 m. 1.6K series engine for sale with all the necessary extras (only gaskets needed) - any good? Engine is presently in Scarborough. Robin. Link to comment Share on other sites More sharing options...
murph7355 Posted May 27, 2001 Share Posted May 27, 2001 I've got a full set of (Lotus Norfolk Mustard) body parts, std. brake master cylinder, inertia reel belts, a couple of headlamp stays and possibly a few other smaller bits in the garage. I also have a std. rad and full exhaust system from a K if he goes that route... Only hassle is that I'm in Dorking. Link to comment Share on other sites More sharing options...
John Posted May 29, 2001 Share Posted May 29, 2001 Check out www.eddie-white-motorsports.com (or motorsport?) John Link to comment Share on other sites More sharing options...
Petrolhead Posted May 29, 2001 Author Share Posted May 29, 2001 Robin Thanks for the reply but I believe he is going the VX route. How much do you want for the 1.6? Andy I will pass on the info Cheers Peter Better to go in a blaze of glory than to fade away teeth.gif Link to comment Share on other sites More sharing options...
Robin Renton Posted May 31, 2001 Share Posted May 31, 2001 Hi Petrolhead, Make me an offer! e-mail: RobinRenton@aol.com tel: 07771 923202 Regards, R. Link to comment Share on other sites More sharing options...
sjwb Posted June 1, 2001 Share Posted June 1, 2001 I have a set of standard front calipers, flexis and discs off a 2000 1.8 Roadsport (with 3500 miles on them). Make me an offer - I need the space. Link to comment Share on other sites More sharing options...
Chelspeed Posted June 4, 2001 Share Posted June 4, 2001 Got the following for sale: Full set of clocks inc speedo cable and right angle adaptor (bit tatty but all work) Most switchgear Master cylinder Front brake calipers, pads and discs Rear discs Standard bilsteins (tired) Standard front blue springs (maybe yellow back springs) Standard width de dion spec top wishbones Full width bench seat back Drivers side bench seat squab Set of 4 Falken ZE502's, 185/60-13 front, 205 rears, all 3mm Two off 185/60-13 A021R part worn Two off 6/21-13 ACB10 soft compound, part worn Any interest to your mate (or anyone else). Link to comment Share on other sites More sharing options...
V7 SLR Posted June 11, 2001 Share Posted June 11, 2001 De Dion tube, half a degree out of alignment. Easy to shim. Offside rear wheel arch, clear fibreglass, painted blue. Offers. Link to comment Share on other sites More sharing options...
Phil Dainton Posted June 15, 2001 Share Posted June 15, 2001 interested in the ACB 10 CHELSPEED Please ring 01344 411092 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now