jeff green Posted March 22, 2004 Share Posted March 22, 2004 Due to some upgrades I have some of the following bits available from a KSeries 1.8 SS which had done 17k at time of removal Full set of Bilstein (Blue) Anti-roll bar Plenuim Charcoal pot Cams and ECU(Mems) 5x Prisoner Rims (Michelin Pilots - tyres worn) Old Cycle wings (long, Chipped and cracked with holes for indicators) and Stays(Will need re-coating) Regards Jeff Jeff Link to comment Share on other sites More sharing options...
Mark Gregory Posted March 22, 2004 Share Posted March 22, 2004 Jeff What colour are the cycle wings? What price are you looking for? Thanks, Mark Link to comment Share on other sites More sharing options...
Ferrino Posted March 22, 2004 Share Posted March 22, 2004 Are the stays for 13/14 inch or 15/16 inch wheels/wings? If 13/14 then please e-mail me on aqsp47 (at) dsl.pipex.com Link to comment Share on other sites More sharing options...
Alias Posted March 22, 2004 Share Posted March 22, 2004 Is the Anti-Roll bar for the front or rear, and what rating is it? One car - 1400 Supersport with 6 gears and clamshell wings. Link to comment Share on other sites More sharing options...
jeff green Posted March 22, 2004 Author Share Posted March 22, 2004 Its a front rollbar rating is a red spot if I remember rightly. Will need new ball ends but are cheap for CC Jeff Link to comment Share on other sites More sharing options...
jeff green Posted March 22, 2004 Author Share Posted March 22, 2004 Stays are 14/15 with long cycle wings in rover amerinth. The wings are cracked around bolt holes and chipped at bottom. Not looking for much on these. Jeff Link to comment Share on other sites More sharing options...
Petrolhead Posted March 22, 2004 Share Posted March 22, 2004 Do the billies inc springs and if so are they std springs and if so how much Ta PS This is for a friend I'm back Link to comment Share on other sites More sharing options...
PAUL MARRIOTT Posted March 23, 2004 Share Posted March 23, 2004 Jeff am interested in the dampers, after Mr petrolhead that is. Paul M Link to comment Share on other sites More sharing options...
PAUL MARRIOTT Posted March 23, 2004 Share Posted March 23, 2004 Jeff am interested in the dampers, after Mr petrolhead that is. Paul M Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now