hi spec crossflow

[Tonmawrie]

Ford crossflow engine built up using ax block bored to 86.25 powermax pistons,lightened and balanced,competition bearings,kent 244 cam with vernier duplex,new big valve head with steel shaft and rocker posts.Lightened and balanced bottom end with competition peco clutch to suit 5 speed.east lincs motorsport shortened,baffled sump.this engine ran for 150 miles when i had trouble with the original head,the engine was taken out,stripped,checked and then rebuilt including the new head by a locl machine shop,Hargreaves engineering,head still off for inspection,includes new competition head gasket.Asking £900.00,ideal for someone running an existing croossflow and wants an easy upgrade to a lot of power.The rebuild cost me nearly £300.00 three months ago and the engine is still sitting in the machine shop,was going to fit it to a striker but have gone yam r1 power instead.

 

Thanks Jeremy

[phild21]

striker YHM

phild21

[Billy Whizz]

Is it sold?

 

Old very noisy BRG 1760 x flow, cycle wings and minilites

[Tonmawrie]

No,its still available,apologies for not replying to the question over whether the head is unleaded or not,Ive been away.I will ring the guy who did the head tommorrow and post the answer.Im sure he would have put hardened seats in.

 

Jeremy

[Nic M]

I am interested if the engine is still for sale.

 

Regards

 

Nic