Tonmawrie Posted March 21, 2004 Share Posted March 21, 2004 vauxhall hpc standard injection system,only did 1200 miles on standard car before upgrade to sbd208 kit,complete with management module etc.offers invited. Also,ford crossflow engine built up using ax block bored to 86.25 powermax pistons,lightened and balanced,competition bearings,kent 244 cam with vernier duplex,new big valve head with steel shaft and rocker posts.Lightened and balanced bottom end with competition peco clutch to suit 5 speed.east lincs motorsport shortened,baffled sump.this engine ran for 150 miles when i had trouble with the original head,the engine was taken out,stripped,checked and then rebuilt including the new head by a locl machine shop,Hargreaves engineering,head still off for inspection,includes new competition head gasket.Asking £900.00,ideal for someone running an existing croossflow and wants an easy upgrade to a lot of power.The rebuild cost me nearly £300.00 three months ago and the engine is still sitting in the machine shop,was going to fit it to a striker but have gone yam r1 power instead. Thanks Jeremy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now