ian balson Posted April 21, 2001 Share Posted April 21, 2001 I'm about to fit a starter button to my carbon fibre dash. Has anyone any experience of making holes in CF. Whats the best method ? Thanks Ian Link to comment Share on other sites More sharing options...
Gridgway Posted April 21, 2001 Share Posted April 21, 2001 use a sharp drill in a hand drill. Tape over where you are drilling, drill slowly and lightly. If you are drilling a bigger hole than a drill, such as a starter button, you can drill round with smaller drills and use a dremel to clean the edges. GRaham Link to comment Share on other sites More sharing options...
Jason Plato Posted April 21, 2001 Share Posted April 21, 2001 Use a metal drill bit with a pilot hole and stick masking tape on the area to be drilled to stop it slipping . Finish with a file . Suggest you use a pair of gloves and a face mask as the dust and splinters are buggers . Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now