murph7355 Posted April 21, 2001 Author Share Posted April 21, 2001 Nuts ordered in gold. If anyone wants any rusty nuts I should have some in a week or so! And will you lot please kiss and make up over this K/Vx thing. You could have to drive a Kia Pride remember! Any 7's a good 7! Link to comment Share on other sites More sharing options...
Pierre Gillet Posted April 21, 2001 Share Posted April 21, 2001 < I have 15 mm of thread when I remove the nut but leave the wheel. Would it be OK? Pierre Link to comment Share on other sites More sharing options...
EFA Posted April 21, 2001 Share Posted April 21, 2001 Er, 15 is normally between 12 and 18, so I guess so..... Arnie Webb The Fat Bloke blush.gif in a not so Slow Vauxhall wink.gif See the R500 eater here See the Le Mans Trip Website here Link to comment Share on other sites More sharing options...
Pierre Gillet Posted April 22, 2001 Share Posted April 22, 2001 wanted to make sure that we have the same values...wink.gif In fact I was concerned that the "12" value was a reference to the diameter. Thanks Arnie Pierre Link to comment Share on other sites More sharing options...
Pierre Gillet Posted April 22, 2001 Share Posted April 22, 2001 My studs are M12 x 1.50 ( 1.6K DD) Pierre Link to comment Share on other sites More sharing options...
murph7355 Posted April 23, 2001 Author Share Posted April 23, 2001 Quick update... They can now do these in closed end if you need them (they reckon these may well be more suited to road use and don't weigh any different [though you'd imagine they must do by a small amount]). I should have them next week. C7 AJM Link to comment Share on other sites More sharing options...
Pierre Gillet Posted April 23, 2001 Share Posted April 23, 2001 At the same price? Pierre Link to comment Share on other sites More sharing options...
murph7355 Posted April 23, 2001 Author Share Posted April 23, 2001 Same price. The guy I've been talking to is called Barry and can be reached at racing-gear@supanet.com Nice guy. Very customer friendly. Link to comment Share on other sites More sharing options...
Pierre Gillet Posted April 24, 2001 Share Posted April 24, 2001 Thanks Andy. Will call Barry! Cheers, Pierre Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now