shn7 Posted January 21, 2004 Share Posted January 21, 2004 Anyone upgraded to carbon dash want to get rid of their std item 🤔 Looking for one to accommodate all std. dials and switches plus big red starter button. Steve. Link to comment Share on other sites More sharing options...
RiF Posted January 21, 2004 Share Posted January 21, 2004 Do you a carbon blank one Have some early development ones going very cheaply, less than a new ally one 😬 Richard in France Flying fast in my very bright yellow 226bhp Duratec 7, with internal kevlar/carbon panels and pushrod suspension 😬 😬 😬.for pictures of 7 and carbon Link to comment Share on other sites More sharing options...
Dickie Normuss Posted January 21, 2004 Share Posted January 21, 2004 Richard How much, and how are the aeroscreens going? Seek forgiveness, not permission. 1700 X-Flow. The sweet sound of carbs!!! see it here Look out, I'm armed and dangerous!!! Link to comment Share on other sites More sharing options...
shn7 Posted January 21, 2004 Author Share Posted January 21, 2004 Ooh ooh, sounds interesting. Though I don't yet know the cost of a new ally one. I presume by blank you mean with no holes at all which would not be a problem. So how much inc postage to Sussex 🤔 Steve. Link to comment Share on other sites More sharing options...
Dickie Normuss Posted January 21, 2004 Share Posted January 21, 2004 Steve I'm not far from you and have the ideal tool to cut the holes I see a plan Seek forgiveness, not permission. 1700 X-Flow. The sweet sound of carbs!!! see it here Look out, I'm armed and dangerous!!! Link to comment Share on other sites More sharing options...
shn7 Posted January 21, 2004 Author Share Posted January 21, 2004 Ric, So where are you and what's the tool? Sounds like we might be into a dual hole cutting session. Steve. Link to comment Share on other sites More sharing options...
Dickie Normuss Posted January 21, 2004 Share Posted January 21, 2004 Sounds like we might be into a dual hole cutting session That sounds dodgy so we'll move swiftly on I've got a Dremel with loads of attachments. I do lots of work on glass and carbon fibre so it shouldn't be difficult. Richard, does 2 count as a bulk buy so we get a discount Seek forgiveness, not permission. 1700 X-Flow. The sweet sound of carbs!!! see it here Look out, I'm armed and dangerous!!! Link to comment Share on other sites More sharing options...
shn7 Posted January 21, 2004 Author Share Posted January 21, 2004 Ric, Dremel's at Dawn it is then. Just bought myself a flexi attachment today. Steve. Link to comment Share on other sites More sharing options...
Dickie Normuss Posted January 21, 2004 Share Posted January 21, 2004 Make sure you store it 100% straight otherwise they permanantly kink ❗ Seek forgiveness, not permission. 1700 X-Flow. The sweet sound of carbs!!! see it here Look out, I'm armed and dangerous!!! Link to comment Share on other sites More sharing options...
Big Brother Posted January 21, 2004 Share Posted January 21, 2004 Richard, YHM Steve Se7en-Up! Not going to you know where with you know who in 2004 😬 Link to comment Share on other sites More sharing options...
RiF Posted January 22, 2004 Share Posted January 22, 2004 Wow that was some response I think I have replied to everyone but if I have not please e-mail me off line at easiclad@aol.com Richard in France Flying fast in my very bright yellow 226bhp Duratec 7, with internal kevlar/carbon panels and pushrod suspension 😬 😬 😬.for pictures of 7 and carbon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now