Anthony Posted November 28, 2003 Share Posted November 28, 2003 Has anyone a good working VX coil with 3 pins Type that is fixed to the back of head for distributor less ignition Many thanks Anthony Please mail me at anthony.burgess@cwceom.cwplc.com Anthony Engine in, oil lines in, now really starting to get nervous Link to comment Share on other sites More sharing options...
Chelspeed Posted November 28, 2003 Share Posted November 28, 2003 Is it one supplied by Vauxhall or is it part of an upgrade by SBD or QED or similar? If it's the latter then it will very likely not be a Vauxhall part. I know SBD use a Ford coil on their wasted spark kits, off a Fiesta if I recall correctly. Not usre if others do too. Link to comment Share on other sites More sharing options...
EFA Posted November 28, 2003 Share Posted November 28, 2003 I always SBD's coil was from a Citroen Xantia..... The 3 pin is the GM OEM type and they are hideously expensive. Fat Arn Visit the K2 RUM website See the Lotus Seven Club 4 Counties Area Website here Link to comment Share on other sites More sharing options...
Anthony Posted November 28, 2003 Author Share Posted November 28, 2003 Thanks Arnie, yep they are ... Anthony Engine in, oil lines in, now really starting to get nervous Link to comment Share on other sites More sharing options...
EFA Posted November 28, 2003 Share Posted November 28, 2003 Well go to a VX breaker then???? Fat Arn Visit the K2 RUM website See the Lotus Seven Club 4 Counties Area Website here Link to comment Share on other sites More sharing options...
Anthony Posted December 1, 2003 Author Share Posted December 1, 2003 Arnie, any idea what year it is off please ? Link to comment Share on other sites More sharing options...
Peter T Posted December 1, 2003 Share Posted December 1, 2003 Anthony, go to Halfords, they stock these and others Link to comment Share on other sites More sharing options...
EFA Posted December 1, 2003 Share Posted December 1, 2003 93 on up to the last XE's in 96 Fat Arn Visit the K2 RUM website See the Lotus Seven Club 4 Counties Area Website here Link to comment Share on other sites More sharing options...
Anthony Posted December 1, 2003 Author Share Posted December 1, 2003 Thanks Chaps Breakers on web were not too helpful. Will try Halfrauds perhaps with tokens to get 10% off I can also get a hacksaw for the primaries ... Anthony Engine in, oil lines in, now really starting to get nervous Link to comment Share on other sites More sharing options...
Anthony Posted December 3, 2003 Author Share Posted December 3, 2003 Brief update Haufrauds have no listing for Calibra/Vectra coils between 93 and 96 ( on any engine ) Has anyone got a serial number please ? Thanks chaps Anthony Engine in, oil lines in, now where's the hacksaw to cut the secondaries... Link to comment Share on other sites More sharing options...
Swiss_Tony Posted December 3, 2003 Share Posted December 3, 2003 Or you could do it the cheap easy way and fit a new plug James Su77on Se7ens Link to comment Share on other sites More sharing options...
Anthony Posted December 4, 2003 Author Share Posted December 4, 2003 Hi James, nothing cheap about my VX 😬 Anthony Engine in, oil lines in, now where's the hacksaw to cut the secondaries... Link to comment Share on other sites More sharing options...
ECR Posted December 10, 2003 Share Posted December 10, 2003 May be some help Bosch 0221503001. The GM part number for this may be 90443900 Link to comment Share on other sites More sharing options...
Anthony Posted December 10, 2003 Author Share Posted December 10, 2003 Many thanks have found one with Weber Alpha contact Dumb question, coil looks the same, it has same fixing points and has same fitting (4 pin) albeit at slightly different angle. Assume coil is a coil and performance is the same ??? Anthony Engine in, oil lines in, now where's the hacksaw to cut the secondaries... Link to comment Share on other sites More sharing options...
Peter T Posted December 11, 2003 Share Posted December 11, 2003 Yes it is the same, give me the part no please Anthony. Founder Member of The Twisted Prop Club. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now