G.Foulger Posted November 18, 2003 Share Posted November 18, 2003 I have a number of 7 bits laying around the garage if anyone is interested. Let me know what your looking at and I am sure we can come to an agreement on the price. 4into1 side exit exhaust system for BDA (not stainless but in good condition) Cylindrical dry sump tank Vauxhall race type aeroscreen Side intrusion bar '89 de-dion standard roll over bar (needs new powder coat) I think also an FIA roll over bar with diagonal cockpit brace also for '89 dedion Weber 45 dcoe carb for 2.0Xe engine VDO rev counter Bell housing and alloy spacer for crossflow to type9 box (i think that also does zetec) BDA engine mounts (same as crossflow?) I need to dig around but I think I also have some of the earlier side screens and an as new condition hood from an '89 car. Cheers Guy Link to comment Share on other sites More sharing options...
Graham Torbitt Posted November 18, 2003 Share Posted November 18, 2003 Guy YHM re Hood and FIA bar Graham Link to comment Share on other sites More sharing options...
Drumster Posted November 18, 2003 Share Posted November 18, 2003 Guy, YHM re dry sump tank Chris Alston www.C7CAT.com 1800 Supersprint Drive it like you stole it! 😬 Link to comment Share on other sites More sharing options...
KayTee Posted November 18, 2003 Share Posted November 18, 2003 Hi ! Do you have a picture of the 4-1 ? Are they equal length ? Cheers - Karsten Link to comment Share on other sites More sharing options...
Zetec Rich Posted November 19, 2003 Share Posted November 19, 2003 Guy, Is the bellhousing the alloy one ? Link to comment Share on other sites More sharing options...
Al_W Posted November 19, 2003 Share Posted November 19, 2003 Guy I'd be interested in the bellhousing if it's the ali one regards, Al Link to comment Share on other sites More sharing options...
graham bass Posted November 19, 2003 Share Posted November 19, 2003 Guy, if you have the earlier side screens, what condition are they in. I may be interested if they are better than mine? Regards Graham Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted November 19, 2003 Area Representative Share Posted November 19, 2003 Guy Interested in dry sump tank if not already gone Regards Paul Link to comment Share on other sites More sharing options...
Mike Bey Posted November 19, 2003 Share Posted November 19, 2003 Guy May be interested in the Weber 45. It's for a friend who is after a single 45 DCOE. How much would you want for it? Mike Link to comment Share on other sites More sharing options...
G.Foulger Posted November 19, 2003 Author Share Posted November 19, 2003 Update, the carb is only one, there is one interested person but if that comes to nothing then I will let you know. The sidescreens seem in good condition to me, not as new cos they are 13 years old. The bellhousing is not alloy i am affraid. The exhaust primaries all look to be one length, it was built by a company in Daventry who know what they are doing. I will try and get some photo's. It does come with a heat sheild. Did not expect so many replies, could you email me rather than post then I can keep track of first come etc. Cheers Guy Link to comment Share on other sites More sharing options...
Tyrone Posted November 20, 2003 Share Posted November 20, 2003 Guy YHM re screen Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now