EFA Posted October 21, 2003 Share Posted October 21, 2003 Anyone got a knackered one of these - I need to salvage one small part..... Thx Fat Arn Visit the K2 RUM website See the Lotus Seven Club 4 Counties Area Website here Link to comment Share on other sites More sharing options...
Peter T Posted October 21, 2003 Share Posted October 21, 2003 Sorry mate, binned one last week Founder Member of The Twisted Prop Club. Link to comment Share on other sites More sharing options...
Swiss_Tony Posted October 21, 2003 Share Posted October 21, 2003 Arnie What do you need? James Su77on Se7ens Link to comment Share on other sites More sharing options...
rjc Posted October 23, 2003 Share Posted October 23, 2003 I could use a complete unit for refurbishment. So if there is one going after Arnie give me a call. Regards Rowland Link to comment Share on other sites More sharing options...
EFA Posted October 23, 2003 Author Share Posted October 23, 2003 James, Discovered that what I needed was the cambelt pulley spacer for the crank, which is not an integral part of the oil pump. So Rowland all is yours! Fat Arn Visit the K2 RUM website See the Lotus Seven Club 4 Counties Area Website here Link to comment Share on other sites More sharing options...
rjc Posted October 24, 2003 Share Posted October 24, 2003 What a gentleman ! I'll have a dig about in my VX bitties bin and see if there's a spacer in there spare. I'll post a yes or no tomorrow. James any luck with a complete unit ? Regars Rowland Link to comment Share on other sites More sharing options...
EFA Posted October 24, 2003 Author Share Posted October 24, 2003 Rowland, I just had to pay £31 for what is little more than a steel ring. Fat Arn Visit the K2 RUM website See the Lotus Seven Club 4 Counties Area Website here Link to comment Share on other sites More sharing options...
rjc Posted October 25, 2003 Share Posted October 25, 2003 Ouch ! Bloomin' expensive. If you mean the steel ring that is sandwiched between the cam belt pully cog and the lobe drive flats I won't tell you I dug one of those out of the bits bin last night, 'cos you'd only get upset. (it was rather 'well used' though). I do hope an oil pump comes along soon ! Regards Rowland Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now