RESOLVIWOLF Posted October 20, 2003 Share Posted October 20, 2003 i press button 1 & 2 simultaneously to go into config mode and scroll through the various parameters with button 3 but there doesnt seem to be many of them ..... i have no oil or water temp warnings coming up and these are the ones i wish to configure ? anyone have any ideas how to access them .. are they hidden ? cheers Rich Link to comment Share on other sites More sharing options...
Red SLR Posted October 20, 2003 Share Posted October 20, 2003 If anyone has a stack dash instruction book that is e-mailable can they send it to me? Ta Simon. Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted October 20, 2003 Support Team Share Posted October 20, 2003 You can download it from the Stack website here. I read somewhere that the Caterham fitted dash doesn't have the full functionality of one bought direct - can't confirm that though. Shaun Yellow SL #32 Link to comment Share on other sites More sharing options...
Red SLR Posted October 20, 2003 Share Posted October 20, 2003 Ahh..... Link to comment Share on other sites More sharing options...
bertie Posted October 20, 2003 Share Posted October 20, 2003 Which version do Caterham use? I've got one on my R400 but the manual gives very little info on the function or abilities of the dash. Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted October 20, 2003 Support Team Share Posted October 20, 2003 Bertie - I'm pretty sure that Caterham use the ST8130M but with some of the functions disabled (keeps the cost down I guess) but I don't know which functions. Jackal - I haven't tried to configure mine in any way as the warnings seem to be set at sensible points (a hot trackday confirmed most of them ). I wonder if the Caterham installation has fixed warning levels? I guess you'll have to give them a call. Shaun Yellow SL #32 Link to comment Share on other sites More sharing options...
mic Posted October 20, 2003 Share Posted October 20, 2003 Rich I'm sure you can't configure oil and water settings. You can set wheel circumference, fuel pressure warning and coil pick up. Mick Link to comment Share on other sites More sharing options...
Mark w Posted October 20, 2003 Share Posted October 20, 2003 I have spoken to stack today as i wanted a new car with a different Stack to the standard offering.The Caterham Stack is an 8130 the only difference is that the low level settings ( oil pressure etc)are not user programmable . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now