single wheel nut - or 2 even better

[wonkey eyed barmaid]

single wheel nut (or 2 would be even better!) to suit 'Revolution' make alloy wheel.

 

these are unusual nuts; known as 'sheath nuts' i think. The sheath/shaft needs to be 17mm dia and 34mm long. it should have a 26mm dia washer with it too.

the thread would need to fit ital wheel studs.

 

anyone got some old wheel nuts like this around??

 

cheers

[J.R.]

Grant

 

I have plenty of these assuming that the stud thread is the same on the Ital axle as the Ford/De-dion which I think is M12 * 1.5

 

Contact me on 07768 695599

[wonkey eyed barmaid]

thanks for the reply J.R - i will have to measure the thread pitch on the stud and get back to you. thanks.

[STEVE GILBERT]

I can confirm Ital studs are much smaller than Ford. Sorry.

 

HTH

 

Steve

 

See My Old Zetec Power 7 Here. Caterham Fireblade update soon

[Gerard]

Have you tried Mick at redline verry helpfull,has a real heart for 7s

[wonkey eyed barmaid]

unfortunately the ital thread is more like M10 pitch. i may still be interested in 1 of those nuts though JR, as a last resort if I cannot get anything more suitable, I will chop off 1 stud on the wheel carrier and weld on a stud of suitable M12 thread... cheers.

 

redline is where i bought the revolution centre caps - i did enquire about suitable spare nuts, but they never responded, and simply sent the caps.