John Gaines Posted July 10, 2003 Share Posted July 10, 2003 I have just recieved an oil pressure sender from caterham which is for a ford x flow, I was under the (wrong) impression that it would fit the gallery in the Zetec block. The blanking plug in the block is larger than 1/4" and of a more coarse thread. Is there another sender available or a suitable adaptor? Any advice most welcome. Cheers, John. Link to comment Share on other sites More sharing options...
Colin R Posted July 10, 2003 Share Posted July 10, 2003 There is indeed an adaptor. I sourced one from Caterham USA. It comes with a braided hose so it will clear the oil filter. I'm sure you will find one like it nearby. Link to comment Share on other sites More sharing options...
Paul Turner Posted July 10, 2003 Share Posted July 10, 2003 John When I installed my Zetec the sender from the x-flow fitted staight in on my 94 engine. Can I assume that you have a later engine, if not it should fit. PAul Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now