ThunderPants Posted July 3, 2003 Share Posted July 3, 2003 I have a brand new bog standard K series cylinder head complete with valves, followers, cams etc. Anybody interested ? Ideal for a porting job or if you have head problems. Looking for about £225. Bernard Link to comment Share on other sites More sharing options...
wallom Posted July 15, 2003 Share Posted July 15, 2003 Hi Is the head for a 1.4 or 1.6/1.8 K engine? David Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted July 15, 2003 Leadership Team Share Posted July 15, 2003 Same head fitted to all "standard" derivatives - ie. 1.4, 1.6, 1.8. Go to Dave Andrews K-Series page for more info. Stu. Link to comment Share on other sites More sharing options...
Peter Carmichael Posted July 16, 2003 Share Posted July 16, 2003 No. The 1.4 K head has to mate up to 75mm bores rather than 80mm bores. The combustion chamber shape has to be different. The 1.6K and 1.8K heads are the same. Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted July 16, 2003 Leadership Team Share Posted July 16, 2003 Incorrect Peter. The early low port heads were different, but the later high port heads are the same. Unfortunately the head used on the 1.6 & 1.8 was designed for the 1.4, hence the over small valve sizes. Stu. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now