Roland Posted June 11, 2003 Share Posted June 11, 2003 Thanks in advance!! My 'old' foam baffle appears to have been glued into place on the alluminium 'carrier' plate. (then trimed to the profile) Do I have to glue the replacement into place? With what? if not, how is it held during asy?I am mid way thru the job so would appreciate a timely reply..Many thanks. Roland Link to comment Share on other sites More sharing options...
F355GTS Posted June 11, 2003 Share Posted June 11, 2003 Roland Mine wasn't glued, however it was a bit sticky around the holes for the two bolts. I've never read of it being glued or stuck on, you will need to trim it though particularly to allow the dipstick to pass by into the sump Mark Link to comment Share on other sites More sharing options...
PAUL MARRIOTT Posted June 11, 2003 Share Posted June 11, 2003 Neither was mine, it was "stuck" around the bolts where it had been trapped and to the sump flange where it hadn't been trimmed properly by Caterham but not stuck to the carrier plate trip to fit locate by the bolts and bob is your uncle (well i supose he must be somebodies uncle, isn't he?) Paul M. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now