Jump to content
Click here if you are having website access problems ×

wiring my fuel pump up


millsn

Recommended Posts

How do I run the cables down the tunnel? I can't seem to reach high enough. I can't take the propshaft out as the car is without ngine and on axle stands. I want to run the cable at the top of the tunnel to keep it out of the way of the prop. Can I access the tunnel top somehow?
Link to comment
Share on other sites

Nigel,

 

What chassis do you have??

 

Access to the tunnel varies considerably depending on the type (Live Axle or Didion) and the year of manufacture of your chassis.

 

On some DiDions (those pre '96 with padded centre consoles) the whole tunnel top lifts off.

 

On others there is are tow removable alloy sections above the diff nose and the panel through which the gear lever pokes. If you have carpets remove the tunnel carpet and all will be revealed.

 

The its just a coathanger and some patience!

 

 

 

Arnie Webb

Organiser- L7C Le Mans Trip

To book for this years Le Mans Trip see The Le Mans Trip Website

Its nearly full!!!

Link to comment
Share on other sites

Thanks for the assistance, I finally resorted to the coat hanger, the I read the mails you sent! I've run two wires through as I'm advised you can experience preferential corrosion on the chassis when using the ali as a ground.

 

Chassis is a 92 dedion and I also took the lid off around the gear lever

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...