luddites7 Posted May 20, 2003 Share Posted May 20, 2003 All I have Emerald ECU have connected the FAN up as per DVA instructions I also wanted a switch to be able to manually switch the FAN on - so thought put one in parallel with ECU and switch to earth. This now causes the FANs 15A fuse to pop each time - so from my electronic days I decided there must be something else I need to connect in the Switched part of the circuit - but what ? Has anyone done this before - I know a few people have wired across the FAN switch but I am trying to switch the relay !! Thanks Jason Link to comment Share on other sites More sharing options...
oilyhands Posted May 20, 2003 Share Posted May 20, 2003 Just bridge the wire that goes to the ECU and take it to one side of your switch, then bridge the other side of the switch to earth. Oily Link to comment Share on other sites More sharing options...
luddites7 Posted May 21, 2003 Author Share Posted May 21, 2003 Cheers Oily - Now up and running with ECU and a switch to put the fan on manually if required. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now