Fast Westie Posted May 12, 2003 Share Posted May 12, 2003 Nothing to do with me here The car in front is a Westfie1d Link to comment Share on other sites More sharing options...
rgrigsby Posted May 12, 2003 Share Posted May 12, 2003 £410 and rising 😳 😳 😳 Rob G www.SpeedySeven.com Link to comment Share on other sites More sharing options...
DohNut Posted May 12, 2003 Share Posted May 12, 2003 But he Paid £1100 and didnt check weather it was flat or chambered head !!! OK its not the first question I would ask but I would ask a lot of questions before shelling out that kind of money. I wonder what the reserve is set at? and is it the kind of thing that was cast "ported" or do you then need to go to RK and get lots of work done on it? Link to comment Share on other sites More sharing options...
rgrigsby Posted May 12, 2003 Share Posted May 12, 2003 Hmm good question, at I guess it would probably benefit from some work by RK but maybe not as much as a standard head. Rob G www.SpeedySeven.com Link to comment Share on other sites More sharing options...
barry.h Posted May 13, 2003 Share Posted May 13, 2003 Depends if it was bought as a bare casting or whether Burtons worked on it. From the picture it seems to have valve guides and valves(?) which might suggest porting work also. Lot of questions would need to be asked. Barry Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now