Peter T Posted May 11, 2003 Share Posted May 11, 2003 My clutch cable is now fouling on my inlet manifold, the threaded sleeve that enters the pedal box is in direct line of my manifold. If i push it all the way in ,it just about clears it, but leaves me with an excess amount of slack in the cable, and therefore cannot move pedal. Do later cars (post 91) have there hole posistioned at an angle, as mine is very square. If someone could post me a picture i would be most gratefull 'Ready Steady' Link to comment Share on other sites More sharing options...
Swiss_Tony Posted May 11, 2003 Share Posted May 11, 2003 Peter The cable on mine enters the pedal box at an angle. I have not got any piccies. If the weather is any good on Thursday I will be in the 7 if you would like to have a look. James Su77on Se7ens Up to my neck in K-series and Duratec engines! Link to comment Share on other sites More sharing options...
Peter T Posted May 11, 2003 Author Share Posted May 11, 2003 Cheers mate 'Ready Steady' Link to comment Share on other sites More sharing options...
Harry Flatters Posted May 12, 2003 Share Posted May 12, 2003 Likewise Pete *arrowright*Harry Flatters *arrowright* AKA Steve Mell of Su77on Se7ens and Joint AO - Surrey Link to comment Share on other sites More sharing options...
Peter T Posted May 12, 2003 Author Share Posted May 12, 2003 Thanks lads, i must remember to write a list of queries 'Ready Steady' Link to comment Share on other sites More sharing options...
Peter T Posted May 12, 2003 Author Share Posted May 12, 2003 James, are you still going to give me a lift on Thurs? 😬 'Ready Steady' Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now