ECR Posted Wednesday at 10:22 Share Posted Wednesday at 10:22 when main beam is selected is dipped beam still operating? In other words are both operating at the same time when main beam is selected? Link to comment Share on other sites More sharing options...
OldAndrewE Posted Wednesday at 10:36 Share Posted Wednesday at 10:36 No, not on 'normal' twin filament bulb systems (unless the wiring has been altered). Link to comment Share on other sites More sharing options...
ECR Posted Wednesday at 10:45 Author Share Posted Wednesday at 10:45 Thanks, It's something i had never thought about before Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted Wednesday at 10:55 Member Share Posted Wednesday at 10:55 As above. And you can test it by flashing high beam while the dipped beams are ON. Jonathan PS: Of course with the lower heat output of LEDs you might be able to have them all ON. Link to comment Share on other sites More sharing options...
OldAndrewE Posted Wednesday at 11:47 Share Posted Wednesday at 11:47 50 minutes ago, Jonathan Kay said: Of course with the lower heat output of LEDs you might be able to have them all ON. And if you did this the dipswitch would just need to be an ON/OFF switch for the high beam, not the normal changeover switch Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now