RogerB Posted June 19 Share Posted June 19 I'm looking for a bolt on to the tailpipe device for my noisy 1.6 K series for trackdays. Such as the decible slayer sold by Deamon Tweaks. Tail pipe dimensions are: I.D. 54mm O.D. 57mm O.D. of rim 70mm. Thanks, Roger. Link to comment Share on other sites More sharing options...
IanRL Posted July 5 Share Posted July 5 Hello Roger. Is this the sort of thing you are looking for? It was used on my 2000 ex- Academy Caterham for track days so I think it would fit onto your 1.6K silencer exit. can dig it out of my spares box & measure it at the weekend if it is of interest. Let me know. Cheers Ian Link to comment Share on other sites More sharing options...
RogerB Posted July 13 Author Share Posted July 13 Hi Ian, Thanks for your reply. I'm wondering how this would attach to my tail pipe. Would it need cutting so it would be permanently attached or could I just fit it if a failed a track noise test Apologies for slow response. Roger. Link to comment Share on other sites More sharing options...
IanRL Posted July 13 Share Posted July 13 No problem Roger. It fitted up the exhaust outlet on my Academy car. OD of the insert bit is 47.8mm. The previous owner had drilled a 4mm hole in the tail pipe & used a small bolt with a Jubilee clip to stop it popping off. You can just see the hole (marked with the arrow) in this photo. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now