Duratec oil temperature sensor for Stack dash

[TomTit7]

Looking to add oil temperature function to Stack dash on 2005 Duratec. I was going to use sump drain plug (  38D011A) and add sensor. I've got to have a look for any loom/ cable/plug/socket on the back of the Stack dash.

Does anyone know what sensor/kit is needed ?

Thanks 

[Dan R]

It may be worth calling 213 Performance who are the Stack agents for the UK and are very helpful 

[TomTit7]

Thanks for the info, I'll give them a call 👍

[Jonathan Kay]

I have the Caterham wiring diagrams for Stack dashes and some correspondence with 213 Performance about the set-up. if you'd like copies please send me a Private Message with your email address.

Jonathan

[John Vine]

12 hours ago, TomTit7 said:

Looking to add oil temperature function to Stack dash on 2005 Duratec. I was going to use sump drain plug (  38D011A) and add sensor. I've got to have a look for any loom/ cable/plug/socket on the back of the Stack dash.

Does anyone know what sensor/kit is needed ?

Thanks 

Wet or dry sump?

My 2008 R400D (non-Stack) is wet sump.  I fitted sender 71167 (same as the coolant temp sender) into drain plug 38D011A:

But whether that sender would work with a Stack, I'm afraid I couldn't say.

JV

[TomTit7]

Wet sump.

Yours is the sort of thing I was thinking of. I just need to know what sensor and loom/wiring connector.

Thanks 👍 

[Jonathan Kay]

1 hour ago, John Vine said:

My 2008 R400D (non-Stack) is wet sump.  I fitted sender 71167 (same as the coolant temp sender) into drain plug 38D011A

Electrical spec for 71167:

TT6811-03

CATERHAM

1/8 NPTF 1158-44 ohms B

71167

https://www.smiths-instruments.co.uk/products/sender-units-temperature-senders/

Jonathan

[TomTit7]

Received guides and info. Jonathan 

Much obliged 👍