Glynh Posted October 28, 2023 Share Posted October 28, 2023 Am I correct in assuming that the outer plastic ring unscrews and the gauge is then removed through the front of the dashboard. I’m going to try red LEDs to improve night vision as the current white ones are ridiculously bright. Link to comment Share on other sites More sharing options...
aerobod - near CYYC Posted October 28, 2023 Share Posted October 28, 2023 That is correct, a bit of pressure against the front bezel while jiggling the speedo a bit and rotating the ring on the rear, then it should come out. Link to comment Share on other sites More sharing options...
PlastererPete Posted October 28, 2023 Share Posted October 28, 2023 Have you thought about some tinting film on the face of the gauge instead? Link to comment Share on other sites More sharing options...
Glynh Posted October 29, 2023 Author Share Posted October 29, 2023 9 hours ago, PlastererPete said: Have you thought about some tinting film on the face of the gauge instead? Yes thanks, that’s plan B but I’m not sure if it’s easy to remove later. Link to comment Share on other sites More sharing options...
Glynh Posted October 29, 2023 Author Share Posted October 29, 2023 9 hours ago, aerobod - near CYYC said: That is correct, a bit of pressure against the front bezel while jiggling the speedo a bit and rotating the ring on the rear, then it should come out. Great thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now