Peter G Posted September 26, 2023 Share Posted September 26, 2023 Chaps. Some advice please. My 2000 K series imperial 7 has adjustable platform shocks on them and the adjuster sleeve is fouling on the de dion tube. The shocks are bolted to the lower mounting, I also have a through mounting on the de dion. Any ideas how I can stop the fouling? Is it possible to move the adjuster sleeve up and still have the same ride height? Or should I use the centre de dion mount and adjust the ride height? Or just ad more washers? Thanks. Link to comment Share on other sites More sharing options...
Wrightpayne Posted September 26, 2023 Share Posted September 26, 2023 It's either in the assembly guide or written on blatchat somewhere that with platforms you often need an extra washer to space the shock away from the tube. Its the large ones with the bevelled edge and 1/2" hole. Link to comment Share on other sites More sharing options...
Wrightpayne Posted September 26, 2023 Share Posted September 26, 2023 Link to comment Share on other sites More sharing options...
JP Posted September 26, 2023 Share Posted September 26, 2023 I've just been through this on my rebuild. I'm using ProTech adjustables. ProTech sent me a new set of spacers to give me the clearance I needed. Link to comment Share on other sites More sharing options...
Peter G Posted September 27, 2023 Author Share Posted September 27, 2023 Thanks all, I did reply last night but the message didn't post, new washers being sourced. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now