Leadership Team RogNeedham Posted September 5, 2023 Leadership Team Share Posted September 5, 2023 Hi, I'm looking for a carbon dash for std S3. Ideally with pre cut holes for std gauges, but will also consider a plain one. The newer the better.I'll be removing a carbon dash with holes cut for a Stack.cheersRog Link to comment Share on other sites More sharing options...
Wrightpayne Posted September 6, 2023 Share Posted September 6, 2023 Rog,According to our esteemed sprinting friend there are two types.The older version with three holes between the speedo and rev for alternator, high beam and indicator signal lamps.The newer version has the speedo and rev closer together and the telltale lamps are built into one of these gauges. GLWTS.Ian Link to comment Share on other sites More sharing options...
Leadership Team RogNeedham Posted September 6, 2023 Author Leadership Team Share Posted September 6, 2023 Thanks Ian, I'll consult with my esteemed auto electrician friend ref where the old redundant wires were left under the dash, but suspect it'll be the older format cheersRog Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 6, 2023 Member Share Posted September 6, 2023 Please let us know if you need to identify the wires by colour.Jonathan Link to comment Share on other sites More sharing options...
Leadership Team RogNeedham Posted September 7, 2023 Author Leadership Team Share Posted September 7, 2023 Thanks to all that replied. All sorted Rog Link to comment Share on other sites More sharing options...
Gtsussex Posted September 14, 2023 Share Posted September 14, 2023 Is your old dash up for sale? After a carbon S3 stack dash. Link to comment Share on other sites More sharing options...
Leadership Team RogNeedham Posted September 14, 2023 Author Leadership Team Share Posted September 14, 2023 Hi, GTS .... yes it will be. Having secured a replacement, I won't get round to the swap until the winter, so it depends how much of a rush you are incheersRog Link to comment Share on other sites More sharing options...
Gtsussex Posted September 15, 2023 Share Posted September 15, 2023 Hi Rog,I'm in no rush at all. Ideally it was a job to get done before next spring so that would work fine for me. Assuming it's like this?Thanks,Guy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now