Gridgway Posted August 24, 2023 Share Posted August 24, 2023 Now I have my crossflow back together and so nearly finished, one untoward thing I have found is that the speedo drive from the 4 speed Ford box is leaking quite a lot. To the extent that it needs attending to. It was the one thing I didn't want to have to do with the refresh I've done - ie pull the engine and box out again - hey ho.Does anyone have experience of speedo drive leaks on this box and what might need replacing to stop it?Thanks Graham Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 24, 2023 Share Posted August 24, 2023 Do you know which type of box you have?Burton Power have a lot of useful information as well as stocking the parts.Jonathan Link to comment Share on other sites More sharing options...
OldAndrewE Posted August 24, 2023 Share Posted August 24, 2023 Graham, is this the arrangement you have?It may be possible to undo the bolt holding the forked clamp and then get things out without removing the engine/box. The housing (aluminium on mine) has a small oil seal inside for the drive gear spindle and an O-ring on the outer diameter Link to comment Share on other sites More sharing options...
OldAndrewE Posted August 24, 2023 Share Posted August 24, 2023 Speedo drive O ring seal: 2000E Bullet gearbox (burtonpower.com)The O-ring, can't find the small seal Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 24, 2023 Share Posted August 24, 2023 "It may be possible to undo the bolt holding the forked clamp and then get things out without removing the engine/box."On this type of Seven can you create more space by slackening the gearbox mount (and possibly the engine mounts) and yanking the tail of the box across?Jonathan Link to comment Share on other sites More sharing options...
Gridgway Posted August 24, 2023 Author Share Posted August 24, 2023 Thanks both. JK - worth a look, but access will be tight.Andrew, it's not that box I think as it has the gear lever further back and the access cover is horizontal, not at an angle. Also has an integral bellhousing. I'll work out which box it is. Link to comment Share on other sites More sharing options...
OldAndrewE Posted August 24, 2023 Share Posted August 24, 2023 Is that a Ford type 2? No experience of that, sorry. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now