CSR Carbon coil cover

[PlastererPete]

Does anyone know what kind of glue/adhesive they use to stick the aluminium "Cosworth" plate onto the 2.3 carbon coil cover?

Caterham Parts now sell it without the plate, but in the process of refurbing all the carbon on the car, the coil cover needs doing and it has the plate, so will have one go back on. 

Cheers.

[David aka Blue7]

Caterham use their standard black silicone, which they use for everything including front wheel stays.  Any strong silicone should do eg Gorilla but I drilled a hole at each corner of the plate and used 4 small bolts to secure it to the cover.

David

[PlastererPete]

Thanks for the reply David. I have some of the Teroson MS9220 already so if that's what they use then I'll use that. I just wanted to check as it gets toasty under the bonnet so thought they may have used some high temp adhesive instead.