Rich.E Posted May 6, 2023 Share Posted May 6, 2023 I've been under my car checking and topping up my gear oil and thought I'd give the prop UJ a grease at the same time. The is discovered that the grease nipple is missing, can anyone advise me on the size and thread so I can order another (2009 S3 1.6 sigma, ford T9 gearbox)Thanks Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted May 6, 2023 Member Share Posted May 6, 2023 Some Sevens have them. Others don't. Can you see old broken nipples or threaded holes?For sizes start here. Some are Imperial, some are metric.Jonathan Link to comment Share on other sites More sharing options...
7 wonders of the world Posted May 6, 2023 Share Posted May 6, 2023 depending upon which joints were used they vary, mine are 1/4 UNF, you could pop the other one out to take as a pattern, most agricultural places stock nipples in various lengths. Link to comment Share on other sites More sharing options...
Rich.E Posted May 6, 2023 Author Share Posted May 6, 2023 It seems to have fallen out, it did have one in there a few months ago. I just have the threaded hole Link to comment Share on other sites More sharing options...
John Vine Posted May 6, 2023 Share Posted May 6, 2023 The ones on my 2008 R400D are M6x1, straight, 23mm long. I got a pack of 10 from here.JV Link to comment Share on other sites More sharing options...
Rich.E Posted May 7, 2023 Author Share Posted May 7, 2023 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now