Mark Widdup2 Posted April 26, 2023 Share Posted April 26, 2023 I purchased all of these new to do this conversion but decided to go down a different route so these should be all of the bits needed for the conversion, you'll just need to take your old thermostat out, cut out the centre bit with a Dremmel and refit the base and rubber seal so the old thermostat housing seals. Included is 1 x PRT thermostat 82c light spring, grey,1 x 1m of Samco silicone hose, 1 x alloy T piece, 6 x stainless steel hose clips. All unused but I have marked up the exits on the PRT with a marker pen. Now moved on to Ebay Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now