Vinman1 Posted February 22, 2023 Share Posted February 22, 2023 Hope all are doing well. Trying to figure out what Handbrake handle and set up is correct for my 1979 Caterham Seven with Ford axle. I know whatever handle it is has to be bent for use in a Seven, and have looked at a friends 62, which does not seem to match up with any Triumph drawings. Any inputs or sources greatly appreciated.V Link to comment Share on other sites More sharing options...
SM25T Posted February 22, 2023 Share Posted February 22, 2023 sales@redlinecomponents.co.uk ... Chris keeps these in stock I recall Link to comment Share on other sites More sharing options...
rkeywood Posted February 22, 2023 Share Posted February 22, 2023 Chris was out of stock when this came up a little while back but hopefully he's found some more. Mike Brotherwood suggested as possible source. It does need bending - the '88 Assembly Guide has instructions and diagram. Earlier car might differ but should be clear when trial fitted. Needs to be taken apart before bending and the rod bent separately. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted February 22, 2023 Member Share Posted February 22, 2023 I have the 1988 Assembly Guide for anyone who would like a copy. Jonathan Link to comment Share on other sites More sharing options...
Area Representative Golf Juliet Tango Posted February 22, 2023 Area Representative Share Posted February 22, 2023 Probably the assembly manual is amongst this collection too. http://www.caterham.dk/Assembly_Guides/index.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now