Dobson_justin Posted February 7, 2023 Share Posted February 7, 2023 I'm not sure if I am correctly registered for Prescott, so looking for advice as my options on the website are a bit different from what Andy's email described earlier. I am registered on the events site, but don't have MSUK Championship registration option. I have Healey Sport or British & Midland Championships. This doesn't give me visibility of the June events we need. I have been going around in circles on the site but have no other options. Is this the same for anyone else, as I'm finding it very confusing! Link to comment Share on other sites More sharing options...
Graham Howard Posted February 7, 2023 Share Posted February 7, 2023 Our championship should be on that list. There seem to be many that are missing. Perhaps the website will update later. If not I will call them in the morning before 9:30. Link to comment Share on other sites More sharing options...
Graham Howard Posted February 7, 2023 Share Posted February 7, 2023 If you can see that Justin I think you are registered Link to comment Share on other sites More sharing options...
CheshireCat Posted February 7, 2023 Share Posted February 7, 2023 What email ? Link to comment Share on other sites More sharing options...
Drumster Posted February 7, 2023 Share Posted February 7, 2023 I spoke with Prescott today and was advised that the registration and entry will go live at the same time tomorrow Link to comment Share on other sites More sharing options...
Dobson_justin Posted February 7, 2023 Author Share Posted February 7, 2023 Thanks for confirming Drumster!Chris, an email from Prescott and Andy came out earlier today about registration. Let me know if you need a copy. Link to comment Share on other sites More sharing options...
Dobson_justin Posted February 7, 2023 Author Share Posted February 7, 2023 Thanks for following up Graham Link to comment Share on other sites More sharing options...
Graham Howard Posted February 8, 2023 Share Posted February 8, 2023 Just spoken to BOC and they tell me that all championships will be listed on the registration page at 9:30. Link to comment Share on other sites More sharing options...
Graham Howard Posted February 8, 2023 Share Posted February 8, 2023 Entries now open! Link to comment Share on other sites More sharing options...
magister Posted February 8, 2023 Share Posted February 8, 2023 Bec and myself have entered.We put me to run out of batch - was this correct?Paul Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted February 8, 2023 Area Representative Share Posted February 8, 2023 Paul,At Prescott, the driver that runs out of batch, runs after the main batch. Link to comment Share on other sites More sharing options...
magister Posted February 8, 2023 Share Posted February 8, 2023 Thanks Richard. I'm sure we will be able to change it before the event Link to comment Share on other sites More sharing options...
Drumster Posted February 8, 2023 Share Posted February 8, 2023 Richard, are you joining us in Class 4 this year or fat fingers? ETA I see the reply button isn't working again... Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted February 10, 2023 Area Representative Share Posted February 10, 2023 "Richard, are you joining us in Class 4 this year or fat fingers?" Yes, for the few rounds that I plan to do this year, I'll run in class 4.I've swapped cams, fitted TB's, and a DTA ECU, and had a very pleasantly surprising session on the Northampton motorsport rollers last week. I had previously contemplated having two maps. One to get the best results I could, to use on the Midland hillclimb championship events, and another capped at 155bhp to run class 3. However, after the first run, capping to 155bhp became academic, producing much more than I'd imagined.We then experimented with trumpet lengths and timing, and improve torque through out the usable rev range.I won't be anywhere near the class 4 power limit, but it looks like it should be a very significant step up from the spec that I've run since 2014. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now