Dom Williams Posted October 22, 2022 Share Posted October 22, 2022 Dear all,I suspect this is a long shot, but does anybody happen to know the spec. (and/or a part number) for the standard buttons for a STACK dash (5 identical buttons in a row along the top of the dash in the attached picture, circled)?I cannot find anything on the forum that helps, the STACK dash documentation available online actually refers to another button spec (the 2 buttons circled in the attached picture below), and STACK's online customer support doesn't seem to respond, ever.Thanks in advance.Yours, Dom Link to comment Share on other sites More sharing options...
Jonathan Kay Posted October 22, 2022 Share Posted October 22, 2022 We have had help in the past from the UK service agent: 213 Performance.NB: Members' discount.JonathanPS: Failed switch or an interesting project... ? Link to comment Share on other sites More sharing options...
simon_h Posted October 22, 2022 Share Posted October 22, 2022 The rubber covered ones are the standard ones as far as I'm aware. Your picture is too blurry but they sort of look like Apem switches.Apem momentary switch Link to comment Share on other sites More sharing options...
rj Posted October 24, 2022 Share Posted October 24, 2022 The ones used by Caterham are ITW switches and can be found at RS Could be stock No 248-8935 Link to comment Share on other sites More sharing options...
Dom Williams Posted October 24, 2022 Author Share Posted October 24, 2022 Good evening all,thank you very much for your feedback.It seems like Apem and ITW both do their own variant of the same switch. I know that Apem make a load of other switches/buttons for the 7, not sure about ITW. I will keep digging.@Jonathan, no failed switches - my dash has a load of unnecessary holes so am upgrading to a clean (currently cutout-free) carbon version. Thought I would change the buttons for my SPA gauges and STACK tacho to the more elegant Apem/ITW type whilst I was there! Thanks for the link to 213, I will give them a call to see about STACK speedo options.@simon_h, thanks for the link and info@rj, do the switches have ITW printed on them somewhere? I see you have a STACK so assume you may have the switches too to be able to double check (if and when convenient of course)(?)Thanks once again. Dom Link to comment Share on other sites More sharing options...
rj Posted October 29, 2022 Share Posted October 29, 2022 I have various spares. I know for certain they are ITW switches, as is the big red starter button. I just don't remember if the switches used by CC were pre-wired or not. I will have a look at a spare next time I'm in the garage (8 miles away, so not there every day - just like not on BC every day, so sorry for the delay) Link to comment Share on other sites More sharing options...
richwillbolt Posted November 2, 2022 Share Posted November 2, 2022 Hi Dom,I am pretty sure these are:Momentary Switch - Stack Black Push button (caterhamparts.co.uk) - Reference: 76345WI have recently purchase a Stack ST8130 and bought the above x 5 for the holes in the dash, I believe they are the 'function' buttons for the dash.Hope this helps.Cheers Rich Link to comment Share on other sites More sharing options...
rj Posted November 3, 2022 Share Posted November 3, 2022 That's absolutely correct. I searched for them but didn't find anything :-o Mind you they are different from STACK-supplied switches Link to comment Share on other sites More sharing options...
Jonathan Kay Posted November 3, 2022 Share Posted November 3, 2022 76345W, as above.Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now