graearea Posted September 10, 2022 Share Posted September 10, 2022 The Problem. Caterham's mirrors are terrible. Seriously. They're enormous and because they're not convex, you can't see anything.My solutionMy mounts take Spa/Motamec convex mirrors, which means you can change lane without just guessing if you're going to die. They're inspired by (ripped off from) Eccles' mounts (shown below), but they are mounted to your side-screens at 3 points, not 2. That's 300% better! They use the same hinge design as Eccles's mounts, but with the third screw, which hooks into the previously drilled hole that your standard Caterham mirrors mounted into. This creates much, much more stiffness than the original mounts and stops the vibration of the mirror. There is also an access hole so you can access the tightening screw for the Spa mirrors. As all holes drilled for Caterham mirrors are different, all the mounts need to be unique. Left side, right side, both different and custom.How much are they? The first 5 sets will be £60+£6 p&p, but you pay me when you're happy. I'll make them, send them out, receive feedback, fix any problems, and then I'll be re-evaluating the price upwards. They cost more than the Eccles mounts because each one is unique.I've been running mine for a few months now and have done >2000 miles and no problems. they are much more rigid and suffer less vibrationfor all the rest of the info and to order a set, please check out https://graearea.github.io/mirror-mounts.htmlthanksJohn Link to comment Share on other sites More sharing options...
Mark Widdup2 Posted October 18, 2022 Share Posted October 18, 2022 . Link to comment Share on other sites More sharing options...
Simon420R Posted October 19, 2022 Share Posted October 19, 2022 These look really interesting. As someone who has recently taken delivery of a 2018 420R with terrible windscreen mounted mirrors I'm really interested in these. My doors aren't drilled so could I order these with a 'generic' measurement for the lower hole? Link to comment Share on other sites More sharing options...
graearea Posted October 20, 2022 Author Share Posted October 20, 2022 there isn't really a generic measurement. one of my orders had exactly the same on both sides, but I've had a few people that have had a bit of trouble getting accurate enough measurements resulting in me changing the way I ask people to measure. I need to change the order form a little to reflect this. I don't know how the build manual tells you to drill the holes but you'd only need to drill the first of the mirror holes. Link to comment Share on other sites More sharing options...
Gridgway Posted October 20, 2022 Share Posted October 20, 2022 I'd like to order a pair. What's the new way of measuring please? Link to comment Share on other sites More sharing options...
graearea Posted October 20, 2022 Author Share Posted October 20, 2022 I've _just_ updated the form that is linked from my website.have a look. if it's not clear gimme a poke and I can try and improve it (this is all a bit of a learning curve).I mention this quite a lot but please, please make the dimensions as accurate as possible. there is a little bit of wiggle room in the fitting but not a lot. use some calipers, or a ruler. don't use a tape measure as they are hopeless for this kind of measuring. Link to comment Share on other sites More sharing options...
Gridgway Posted October 20, 2022 Share Posted October 20, 2022 Thanks, I'll give it a go. Link to comment Share on other sites More sharing options...
samsul Posted November 8, 2022 Share Posted November 8, 2022 I have a set on my car. I can confirm that you have to be accurate with your measurements - John had to print up a second iteration for me (very kindly). The mounts work really well and have stabilised the mirrors - no more guesswork! I fitted the Motamecs without any issue. Great solution. Link to comment Share on other sites More sharing options...
Andy135 Posted November 16, 2022 Share Posted November 16, 2022 Interested in these for a car I have yet to take delivery of. Is there a way I can order a set of these in advance of the arrival of the car, or does it truly require car/door specific measurements to be known prior to ordering? Link to comment Share on other sites More sharing options...
graearea Posted November 16, 2022 Author Share Posted November 16, 2022 absolutely. I'll PM you. Link to comment Share on other sites More sharing options...
Andy135 Posted January 21, 2023 Share Posted January 21, 2023 Just fitted a set of these courtesy of @graearea. The measurements for my RHS mirror were a bit peculiar so kudos to him for making 3 versions for me to try - one of them fitted perfectly in the end. Haven't driven with them yet but they feel a lot sturdier than the standard mirrors, and the SPA mirrors I've fitted mean I can actually see what's behind me now.Let me add that it's worthwhile being as precise as possible with your measurements - I used a digital vernier caliper to measure mine. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now