KARTMAN Posted May 10, 2022 Share Posted May 10, 2022 Hi,I am just renewing the fuel tank on a 1997 K series. The electrical connections on the outside of the pump are in a circular compartment. This compartment does not seem to have a cap, but is filled with some kind of non conductive material. Time has taken a toll on this material and it is falling out. Does anyone know what this material is so I can replace it?Many thanksDavid Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted May 10, 2022 Member Share Posted May 10, 2022 Can you add a photo of what it looks like now, please?Jonathan Link to comment Share on other sites More sharing options...
KARTMAN Posted May 10, 2022 Author Share Posted May 10, 2022 Hi Jonathan, I would if I knew how to attach it, not used Blatchat before Link to comment Share on other sites More sharing options...
KARTMAN Posted May 10, 2022 Author Share Posted May 10, 2022 Link to comment Share on other sites More sharing options...
KARTMAN Posted May 10, 2022 Author Share Posted May 10, 2022 This is not my fuel pump, its supposed to look like this, as you can see where the cable goes in its filled with some type of gel. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted May 10, 2022 Member Share Posted May 10, 2022 Adding photos:The Forum User Guide The shortcut upload method, which is what most Members use most often.Have a play and let us know if you get stuck.Jonathan Link to comment Share on other sites More sharing options...
Area Representative Paul Richards Posted May 10, 2022 Area Representative Share Posted May 10, 2022 Not sure what it is, but looks like silicon and that's what I'd try. Let's see if someone with better knowledgd can help. Link to comment Share on other sites More sharing options...
TomB Posted May 10, 2022 Share Posted May 10, 2022 It’s an epoxy I believe. When I replaced my pump, I also repaired a spot of damage on the wiring in this area,. I picked out the original brown plastic / resin material with a small flat headed screwdriver, and back filled it with a lump of premixed Araldite. Obviously you don’t want want to do this when the pump / tank is on the car, as it will all run out! Link to comment Share on other sites More sharing options...
Englishmaninwales Posted May 11, 2022 Share Posted May 11, 2022 +1 on using epoxy resin. Link to comment Share on other sites More sharing options...
KARTMAN Posted May 15, 2022 Author Share Posted May 15, 2022 Thanks,I used epoxy resin, seems to have worked well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now