David_Stamp Posted May 5, 2022 Share Posted May 5, 2022 I am thinking about getting a new Momo steering wheel to replace the current one - does anyone have a quick, foolproof way to accurately drilling the three mounting holes? All advice welcome! Link to comment Share on other sites More sharing options...
Jonathan Kay Posted May 5, 2022 Share Posted May 5, 2022 Previous discussion.I can't find a template.Jonathan Link to comment Share on other sites More sharing options...
David_Stamp Posted May 5, 2022 Author Share Posted May 5, 2022 Thank you Jonathan Link to comment Share on other sites More sharing options...
Guy Lowe Posted May 6, 2022 Share Posted May 6, 2022 When I bought mine the supplier drilled it, countersunk it and supplied the black anodised bolts & nylons at n extra cost. Link to comment Share on other sites More sharing options...
Doc007 Posted May 6, 2022 Share Posted May 6, 2022 Make sure you drill them the right way up! I bought a secondhand wheel without thinking and when it arrived the hole pattern is the opposite to my other wheels (and therefore the steering column.I'm going to have to get an adapter plate made up to switch them around as the MOMO logo is in the position of one of the holes if I were just to drill three more. Anyone know where/who could make the be up for me? Link to comment Share on other sites More sharing options...
ScottR400D Posted May 7, 2022 Share Posted May 7, 2022 #5 I don't remember too clearly but not long after building my car in 2015 I needed another QR fitting because my son and I wanted different steering wheels. (Being different heights, with the original I couldn't see the shift lights, with mine he can't see the speedo!)I just bought a standard Lifeline boss and found that with it on the wheel drilled as per the original CC supplied one, the wheel was upside down!The conclusion I drew was that the bosses supplied by CC are 180 degrees out to the standard Lifeline bosses. In the end I had to buy a new upper column c/w boss from CC. You might find that your S/H wheel will fit with a non CC Lifeline boss. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now