Markiebabes Posted January 21, 2022 Share Posted January 21, 2022 No one has stock! CC no stockRedline no stock Surely must be another supplier? Tia Mark Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted January 21, 2022 Leadership Team Share Posted January 21, 2022 Assume you mean the o-rings?Stu. Link to comment Share on other sites More sharing options...
Wrightpayne Posted January 21, 2022 Share Posted January 21, 2022 The base on mine is sealed to the bellhousing with RTV sealant. I've found O rings in other parts of the DS system are standard size off the shelf seals. What size they are is another matter! Link to comment Share on other sites More sharing options...
Englishmaninwales Posted January 21, 2022 Share Posted January 21, 2022 Do you mean the two larger o rings under the swirl tower screw top (or later screw type fixed with caphead screws) or the smaller one under the top flange of the central tube insert?If you confirm, I can measure them and Simply Bearings will most probably be able to supply. Link to comment Share on other sites More sharing options...
Markiebabes Posted January 21, 2022 Author Share Posted January 21, 2022 https://caterhamparts.co.uk/dry-sump/1477-o-ring-set-for-swirl-tower-assembly.html Link to comment Share on other sites More sharing options...
Markiebabes Posted January 21, 2022 Author Share Posted January 21, 2022 Stu yes WrightPayne thanks E-in - Wales #4If you could measure that would be fabulous!I can then order Link to comment Share on other sites More sharing options...
Englishmaninwales Posted January 22, 2022 Share Posted January 22, 2022 2 largest o rings (under screw cap) are ID 45mm cross section 2.5mm1 medium o ring (under retaining plate for cylindrical tower insert) ID 34mm cross section 1.4mm1 small o ring (under dipstick cap) ID 9.5mm cross section 1.6mm1 small o ring (under breather spigot) ID 10mm cross section 1.4mmAll measurements as best I can with a vernier! I'm unsure if they are nitrile or Viton.Malcolm Link to comment Share on other sites More sharing options...
Markiebabes Posted January 22, 2022 Author Share Posted January 22, 2022 Thanks you Malcom Now to find a supplier! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now