Loom connector tool

[Hulie Biasion]

Hi,

Does any one have the details of the tool to remove the pins from the loom plug where the side repeaters join the loom at the front of the car. Car is a 2005 K Series.

Thanks Julian

[Geoff Brown]

If you disconnect the Econoseal plug & look inside the body you will see a small tab which you depress with the tip of a jewelers screwdriver, at the same time gently pulling the wire & terminal in question out.

I am sure someone will be along to correct or enlarge on this subject !!

[John Vine]

As Geoff says, a jewellers' screwdriver does the job.  Prise out the little yellow insert, then insert the blade under the terminal pin while pulling gently on the wire.    

If you really want to invest in a suitable tool, Polevolt offer this one.

JV

[Hulie Biasion]

Thanks both for the quick responses, the key bit of information was knowing it was a Econoseal plug.

Thanks again Julian