A7 OOH Posted December 24, 2021 Share Posted December 24, 2021 I need to replace the rubber piping on my S/S wing protectors- what size rivets do I need.Thanks Link to comment Share on other sites More sharing options...
OldAndrewE Posted December 24, 2021 Share Posted December 24, 2021 Mine are 5/32" Link to comment Share on other sites More sharing options...
Guy Lowe Posted December 24, 2021 Share Posted December 24, 2021 I used M4 x 12 Link to comment Share on other sites More sharing options...
OldAndrewE Posted December 24, 2021 Share Posted December 24, 2021 That will do as well. Pretty much the same size as 5/32" (5/32" = 3.97mm) Link to comment Share on other sites More sharing options...
Guy Lowe Posted December 24, 2021 Share Posted December 24, 2021 Reply # 4 Diameter is not that critical, but to go through protector, piping & wing you will need at least 12mm. Link to comment Share on other sites More sharing options...
aerobod - near CYYC Posted December 24, 2021 Share Posted December 24, 2021 Also, don't forget the washer on the inside of the wing on the ends of the rivets, otherwise there is a likelihood of splitting or pulling through the fibreglass. Link to comment Share on other sites More sharing options...
Guy Lowe Posted December 25, 2021 Share Posted December 25, 2021 #6 Link to comment Share on other sites More sharing options...
A7 OOH Posted December 25, 2021 Author Share Posted December 25, 2021 Thanks Guys Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now