pkw2704 Posted October 27, 2021 Share Posted October 27, 2021 ok, finding out 421 systems for a K series are a bit thin on the ground used,so I have sold my soul and purchased new from Caterham . I will be fitting it over the coming month once I get the car MOT'dAny tips on cutting the hole in the body (tools and technics used?) .Also considering giving the system a polished finish,again tips welcome.Do I have to change anything under the bonnet on my 2005 s3 imp chassis? Alternator and starter ok?,would you used wadding to keep the heat down? Link to comment Share on other sites More sharing options...
Area Representative Nick Bassett Posted October 28, 2021 Area Representative Share Posted October 28, 2021 Hi there,I did exactly this to my last 7 and compiled some notes on how to do it.PM your email address and I'll forward a word doc - I also have a scale template for the shape & size hole you need to make.CheersNick Link to comment Share on other sites More sharing options...
K7 VCT Posted October 28, 2021 Share Posted October 28, 2021 Cutting the new hole is a very nervous process, did it 22 years ago . Best of luck. Someone hopefully may have a template that fits in side the original hole to give the new outline..... Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted October 28, 2021 Member Share Posted October 28, 2021 "Any tips on cutting the hole in the body (tools and technics used?)"IIRC there are reports in the archives using hole drills and Dremels with cutting discs. Followed by edge deburring. All successful but often nerve-racking, as above. Usual safety precautions.Jonathan Link to comment Share on other sites More sharing options...
ECR Posted October 28, 2021 Share Posted October 28, 2021 A nibbler attachment for an electric drill works well.(eBay £12.00). Finish off with a small sanding drum in the same drill (also from eBay). Take small bites and keep checking Link to comment Share on other sites More sharing options...
pkw2704 Posted October 28, 2021 Author Share Posted October 28, 2021 what are the views on exhaust wrap/sleeve to reduce heat ? and did anyone have to mod the alternator or starter due to heat Link to comment Share on other sites More sharing options...
ECR Posted October 28, 2021 Share Posted October 28, 2021 I took mine off. It seemed to be badly affecting the metal. It seemed to be making it grainier. Link to comment Share on other sites More sharing options...
Wrightpayne Posted October 28, 2021 Share Posted October 28, 2021 On a K there are two considerations / schools of thought...- Wrapping helps reduce under bonnet temps and protect the starter and alternator from excessive heat.- Wrapping causes heat build up in the head and can cause ally to soften. My primaries are wrapped / painted with cool-tec products. 24 years old soon and on original starter, alternator and head.Ian Link to comment Share on other sites More sharing options...
pkw2704 Posted October 28, 2021 Author Share Posted October 28, 2021 thinking of wrapping mine ,found some sleeve stuff and will give it a try. Wondered if the flow is better, will the heat be less,or am i talking rubbish.The stuff I have seen is looser than the wrap ,so heat transfer in the bay is reduced. So no need to spin the back of the alternator terms ? Link to comment Share on other sites More sharing options...
David Brown Posted October 28, 2021 Share Posted October 28, 2021 I also fabricated a heat shield to protect the starter solenoid and reversed/rotated the position of the connectors on the alternator to move them 180 deg from the heat. Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted October 29, 2021 Leadership Team Share Posted October 29, 2021 My SLR has non wrapped primaries and a basic heat wrap for the WOSP starter and I've had no issues. I'd previously wrapped the primaries but discovered one of the brass inserts in the plastic cam cover backplate had become loose because the plastic around it had melted. I couldn't be sure but felt the only reason could be the exhaust wrap causing a higher than normal cylinder head temperature which is a known problem. Subsequently I removed the wrap and I'm unlikely to use again.By comparison my old '95 1400 suffered starter problems due to the primaries running very close to the o/e starter, primary no.4 on the SLR system has quite a lot more clearance.Stu. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now