56 Posted September 17, 2021 Share Posted September 17, 2021 Having a clear out of engine parts that I collected and no longer need. Collection from Daventry preferred. Pair of used Piper 633 Camshafts, used for no more than 1000 miles - SOLDSingle used Piper BP285H camshaft, unknown usage but looks to be in good condition - £150Distributor rotor drive used but I believe it can be refitted? - £5Pair of Piper vernier pulleys (black), used but in very good condition - SOLDSet of MaxSpeeding 1.8K forged con rods complete with ARP bolts and assembly lube, boxed and unused - SOLDJenvey aluminium fuel rail with fasteners, new and unused - £40Set of used Omega forged pistons (80.0mm), unknown usage but have been checked over by Knight Engine Services and measured (sizes written on underside). No issues found. Complete with rings but require circlips and possibly new gudgeon pins (available from Omega) - SOLD52mm throttle body, used - SOLD Hopefully photos are visible here:https://photos.app.goo.gl/ffo6eKgr3fmamfC3AThanks,Matt. Link to comment Share on other sites More sharing options...
revilla Posted September 17, 2021 Share Posted September 17, 2021 Can I take the MaxPeeding rods and the 52mm throttle body please? May be interested in the 633 cams and Verniers for an engine I'm building for someone but need to check with him first. Link to comment Share on other sites More sharing options...
56 Posted September 17, 2021 Author Share Posted September 17, 2021 Yes you can PM sent Link to comment Share on other sites More sharing options...
Adam Godfrey Posted September 17, 2021 Share Posted September 17, 2021 Interested in the 633 cams and verniers if still available. Will send pm. Link to comment Share on other sites More sharing options...
revilla Posted September 17, 2021 Share Posted September 17, 2021 Adam, I'm not in a position to give a definite Yes for the cams and Verniers so I'll stand aside and let you take them. Link to comment Share on other sites More sharing options...
jackb_ms Posted September 18, 2021 Share Posted September 18, 2021 HelloDo you know if the fuel rail will fit a engine equiped with the Titan roller barrel TB?Jack Link to comment Share on other sites More sharing options...
56 Posted September 18, 2021 Author Share Posted September 18, 2021 Hi Jack. Sorry, I don't know on that one. It was supplied with Jenvey DTH throttle bodies so I suspect not but can't say for sure. Link to comment Share on other sites More sharing options...
21jigsaw Posted September 19, 2021 Share Posted September 19, 2021 Hi Jack,Early rollers were fitted with the std. cast fuel rails.MGR replaced the cast with a plastic version the later rollers were machined to accommodate 'thicker' plastic ones.Dave Link to comment Share on other sites More sharing options...
jackb_ms Posted September 19, 2021 Share Posted September 19, 2021 Hi DaveI have the plastic one but I don't know which version.How can I check which version I have?Jack Link to comment Share on other sites More sharing options...
richwillbolt Posted November 28, 2021 Share Posted November 28, 2021 Hi Matt, Are the pistons still available?Many thanks,Rich Link to comment Share on other sites More sharing options...
56 Posted November 29, 2021 Author Share Posted November 29, 2021 Hi Rich,Yes the pistons are still available. I've updated the first post to show which bits have now sold.Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now