Roll cage - supply and fit

[davidbrown100]

Does anyone have any recommendations where to have a roll cage supplied and fitted.

[Neil220]

https://www.customcages.co.uk/

Based in Daventry

[GulfSeven]

Will Caterham not do it?

[davidbrown100]

Thanks for the replies, I'll ask both..

[CtrMint]

Hi David,

please let us know how you get on, I'm thinking I should have one fitted to my 620.

Can anyone contribute from experience which cage is the better etc?

[pgm]

Hi David

We can supply and fit any of the Caterham cages to order. Have recently fitted the new track day style cage to a 620 for example. Have also had them re powder coated to specific colours etc.

Kind regards PGM

 

[rkeywood]

Re #6

Can older FIA bars be re-powdered and can a homoligation sticker be added? Currently mine is without sticker but I have paperwork from purchase

Thanks

R

[Comp Sec]

The FIA bar is only homologated with the petty strut. The sticker will be on the petty strut if you have one.

[rkeywood]

Thanks but it's an original Caterham FIA bar supplied and used initially without a strut. The strut was added later when mandated for their race series and they were supplied without stickers. So I guess the question is can I use the bar and strut in the Speed Championship?

R

 

 

[Comp Sec]

The regulations state that you should have a sticker proving that the bar has been certified by MSUK.

https://www.motorsportuk.org/wp-content/uploads/2019/12/155-195-Safety-K.pdf paragraphs  1.5.1 and 1.5.2.

This can be obtained from the manufacturer of the roll bar which will be Arch if you have a single diagonal or Caged if you have a double diagonal.

http://www.archmotor.co.uk/
 

https://www.cagedlaser.co.uk/
 

 

[rkeywood]

Thanks, I'll speak with Arch when I've a few moments.